Sunlight, Fading and Uneven Colour

Walnut lightens and oak ambers in direct sun. How to avoid a permanent shadow where the fruit bowl sat.

Finishing and care4 min readUpdated 2026-10-23

Sun does not damage a slab table. It changes its colour, slowly, permanently, and only where the light falls. The damage people notice is never the fading itself. It is the sharp-edged pale rectangle under the laptop that was always in the same place.

Which way each species moves

SpeciesDirectionTimescale
WalnutLightens and warms, loses purple and near-black notesVisible within months, most of it in the first year
OakAmbers and deepens slightly, more goldenSlow and steady over years
PlaneAmbers from pale cream towards honeyNoticeable within the first year

Walnut is the species where this matters most, because it moves fastest and in the direction people do not expect. Detail in how much oil darkens walnut.

The real problem is the mask, not the fade

Even colour change across a whole top is almost invisible, because you see it every day and because the whole surface moves together. What you see is the edge: the line where a placemat, a laptop, a vase or a stack of books blocked the light for a year.

This is why the advice is not keep the table out of the sun. It is do not leave anything in one place on it for months.

Move things, do not cover things

A permanently placed runner on a sunlit table creates the exact stripe you are trying to avoid. Either leave the table clear and let it age evenly, or move whatever sits on it every few weeks.

What actually reduces it

  • Curtains or blinds during the strongest hours. The simplest control and the one people already have.
  • UV filtering window film. Modern films block the large majority of UV without noticeably changing the light in the room. This is the most effective single measure for a table in a south-facing window.
  • A finish with UV absorbers. Some exterior and conservatory-grade products include them. They slow the change, they do not stop it, and most indoor hardwax oils do not contain them. Check the data sheet rather than assuming.
  • Rotating the table end for end once a year if it sits half in light and half in shade.

What does not work

Clear finishes do not block UV unless they specifically say they do. Adding more coats of a normal hardwax oil does not slow fading. Glass over the top blocks very little UV on its own and introduces a condensation problem against a solid wood surface.

If it has already happened

A pale or dark patch from an object sitting in one place is in the wood, not in the finish, so it does not wipe or re-oil out. Two options:

  1. Even it out by exposure. Clear the table, move it into the light, and give it months. On walnut especially, the shaded patch catches up surprisingly well because the rest has already done most of its moving.
  2. Sand the whole top back and re-finish. This resets everything, and the fresh surface then starts ageing again. It is an afternoon with a sander, covered in the sanding sequence for a slab top.

Spot sanding one patch will not work. The surrounding wood has aged and the patch has not, so you end up with a sanded island in an aged surface.

Buying with light in mind

If the table will sit in strong direct sun and you want it to stay dark, walnut is the species that will fight you hardest. Oak and plane move less dramatically. That is a real consideration when choosing between a walnut slab such as C16 and an oak one such as O-15, alongside the differences in walnut versus oak for a table.

Common questions

Does sunlight damage a wooden table?

It changes the colour rather than damaging the wood. Walnut lightens, oak and plane amber. The visible problem is usually the sharp line left where an object blocked the light for months.

How do I stop my table fading in the sun?

UV filtering window film is the most effective measure, with blinds or curtains during the strongest hours. Clear finishes do not block UV unless the data sheet says they contain UV absorbers.

Can a sun-faded patch be repaired?

Either leave the table clear in the light and let the shaded area catch up over months, or sand the whole top back and refinish. Spot sanding leaves a visible island.

Will a tablecloth protect the table from fading?

A permanently placed cloth or runner creates exactly the stripe you are trying to avoid. Either keep the top clear or move what sits on it regularly.

Every slab here is the only one of its kind

Walnut, oak and plane, up to 330 cm, kiln dried to 8 to 10 percent. Shortlist what fits and we send photos, measurements and a delivery quote within a day.

See slabs in stock