How Slabs Are Graded and Described

There is no single grading standard for slabs. What sellers mean by their own terms and what to ask instead.

Choosing a slab5 min readUpdated 2026-10-23

Sawn lumber has grading rules. A board can be sold to a published standard and a buyer in another country knows roughly what will arrive.

Slabs do not work like that. There is no widely used grading standard for live-edge slabs, so every yard invents its own vocabulary, and the words do not transfer between sellers.

Why lumber grades do not apply

Lumber grading is built around yield: how much clear, defect-free material can be cut from a board. That is the right question when you are going to cut the board up.

It is the wrong question for a slab, where you are buying the whole piece precisely because of its defects, its edges and its width. A knot that downgrades a plank is the reason someone wants that slab. The grading system has nothing to say about the thing you are actually buying.

What sellers' own terms usually mean

Treat these as rough signals, not definitions:

Term you will seeUsually means
Premium, AAA, selectThe seller's best stock. Larger, more figured, fewer defects. Entirely self-assessed.
Character, rusticVisible knots, checks and voids. Often good value if the defects suit your piece.
Furniture gradeMeans almost nothing specific. Usually just "suitable for furniture".
Table ready, surfacedAlready flattened on both faces. Check what thickness that leaves you.
Rough sawnAs it came off the mill. You or your maker will flatten it, losing a few millimetres.
Kiln driedShould mean a documented schedule and a measured end moisture content. Ask for the number: kiln dried or air dried.

What to ask instead of asking for a grade

Six questions that get you more than any grade label:

  1. What is the moisture content, measured how and when? A number, a meter type, and a date. This is the single most important answer.
  2. What are both widths, and where is the narrow point? The headline width is the widest point. See how to read a slab listing.
  3. Rough sawn or surfaced, and if surfaced, to what thickness?
  4. How flat is it? Cup, bow and twist across the length. A slab with 2 cm of twist loses that much thickness to flattening.
  5. Do any cracks go through the thickness? See cracks, checks and voids.
  6. Can I see photographs of both faces and both edges, wet? Wet shows the finished colour and figure. Dry hides both.

Flatness is the under-asked question

Everyone asks about cracks. Almost nobody asks about flatness, and flatness decides how much slab you end up with.

A rough sawn slab with gentle cup loses 3 to 6 mm per face in flattening. A slab with a pronounced twist can lose 10 to 15 mm or more, because flattening has to take the whole surface down to the lowest point of the worst corner. A 6 cm slab with bad twist can finish at 4.5 cm, which changes what it is suitable for.

Ask for a straightedge photograph across the width and along the length if you are buying unseen.

Price per square metre is not a comparison

Two slabs at the same price per square metre can be very different purchases:

  • One is 300 by 100 cm and usable whole. The other is 300 by 100 cm with a bad split at 180 cm, so it is really a 170 cm table plus an offcut.
  • One is 6 cm and will finish at 5.6 cm. The other is 6 cm with a twist and will finish at 4.8 cm.
  • One is dry and ready. The other needs another year.

Compare the usable piece, not the headline area. More on this in what drives the price of a walnut slab.

If you want to see how grade translates into money across a real stock list, the slab price index lists every piece we hold with its price per square metre.

Common questions

Is there any official slab grading standard?

Not one in common use for live-edge slabs. Hardwood lumber grading rules exist and are built around cutting yield, which is not what a slab buyer wants. Treat any grade label as the seller's own.

Does a higher grade mean better dried?

No. Drying quality and appearance grading are separate things. A beautiful slab can be badly dried and a plain one perfectly dried. Ask for the moisture number either way.

Should I buy unseen?

Plenty of people do, successfully, when the seller provides proper photographs and real measurements. The checklist is in buying a slab online.

We list the numbers, not a grade

Species, length, both widths, thickness, moisture and a written note on what the slab actually has. Shortlist one and we send the close-ups within a day.

See slabs in stock