A Plane Slab Desk With Visible Ray Fleck
Plane shows a flecked, almost reptilian figure across the face. Why that suits a desk more than a dining table for some people.
Plane is the species most people have never heard of and then want once they have seen a board. It is sold in the trade as lacewood, and the reason is the figure: a dense pattern of small flecks across the whole face, like scales or snakeskin, produced by the tree's unusually large medullary rays catching the light.
On a dining table that figure competes with the food. On a desk, where the surface is the thing you look at all day, it is the point.
What plane actually looks like
The ground colour is pale, from cream to a light pinkish brown, considerably lighter than oak and nothing like walnut. Over that sits the fleck. How strong it is depends entirely on how the board was cut out of the log: rays show as broad flecks when the cut runs close to radial, and as finer dashes when it runs tangential. Across a wide slab you usually get both, changing as you move along the surface.
Two practical consequences:
- It is busy. There is no calm area on a plane slab. If you want a quiet surface, oak is calmer and walnut is calmer still.
- It changes with the light. The fleck is reflective. The desk looks different in morning light at a window and under a lamp at night. This is not a defect and it does not photograph well, which is why plane sells in person more easily than online.
Why plane suits a desk
Three reasons beyond the look.
- Size. Plane gives us the longest and often the widest slabs we carry, up to 330 cm. A desk rarely needs that, which means you can cut a generous desk from a slab and have a shelf or a return left over.
- Weight. Plane sits below oak in density. A desk-sized plane top is lighter to lift onto a base than the same top in oak, which matters when you are installing it alone in a first-floor room.
- Price. Per square metre, plane is usually the cheapest of the three species we stock, and it is the one that gives the most visual effect for the money.
Desk dimensions that work
| Dimension | Target |
|---|---|
| Depth | 60 cm minimum, 70 to 80 cm comfortable, over 90 cm the back of the desk becomes storage |
| Length | 120 cm for a laptop, 140 to 180 cm for two monitors, 200 cm plus for a desk you share or spread out on |
| Finished height | 72 to 75 cm, so subtract the slab thickness from the base height |
| Knee clearance | At least 65 cm from the floor to the underside of the slab |
| Thickness | 4.5 to 5.5 cm finished. Thicker looks heavy and steals knee room |
That last row matters more on a desk than anywhere else. You sit with your thighs under the top, so every millimetre of thickness comes out of your knee clearance. A 7 cm desk top on a 73 cm base leaves 66 cm underneath, which is tight for a tall person. See how thick should a slab table be.
Which edge faces you
A desk has an asymmetry a dining table does not: one long edge is where you sit. You have three options.
- Live edge facing you. Dramatic, and your forearms rest on an irregular surface all day. Works if the edge is gentle, fails if it has deep bark pockets.
- Live edge facing away. The usual choice. You get a straight, comfortable front edge and the natural edge is still visible across the room.
- Live edge on the inside of a curve. If the slab waists inward, putting the concave edge towards you gives a shallow sit-in curve that is genuinely comfortable. C15 is a waisted slab of exactly that shape.
Whichever you choose, soften the front edge properly. A sharp arris under a wrist for eight hours is the most common complaint about a hand-built desk. Round it over to at least 3 mm.
Decide this before you finish the top, not after. A grommet hole or a slot along the back edge is a two-minute job on a bare slab and an awkward one on a finished one.
Finishing plane
Plane takes oil well and the fleck lifts noticeably with the first coat. Two things to know:
- It is pale, so it shows everything. Coffee rings and ink mark a light top more visibly than a dark one. Build an extra coat where your mug lives.
- The surface can raise grain more than oak. The rays sit at a different angle to the surrounding fibres and lift at different rates. Plan on de-nibbing between coats. See raised grain after the first coat.
If you want to keep it as pale as possible, choose a finish sold as non-yellowing. Most oils will warm plane towards honey over time.
Which plane slabs suit a desk
P-18 at 240 by 115 to 125 cm and only 5 cm thick is skip planed on both faces, so the figure is already visible and there is less flattening to do. P-16 at 295 by 93 to 98 cm gives a desk plus an offcut. P-15 at 330 cm is the longest slab we hold and will make a desk and a matching shelf from the same board.
Common questions
What is lacewood?
Lacewood is a trade name for timber with a strong medullary ray fleck. Plane, also called sycamore in some markets, is the usual European source. The name describes the figure, not a single species.
How deep should a slab desk be?
60 cm as a minimum, 70 to 80 cm for comfort with a monitor at a proper viewing distance. Past 90 cm you cannot reach the back, so it becomes shelf space.
Is plane hard enough for a desk?
Yes for normal desk use. It is softer than oak, so it will take dents from dropped tools or heavy equipment more readily. A desk pad under a working area solves that.
Does the ray fleck run all the way through?
The figure is produced by the rays themselves, so it continues through the thickness, but its appearance changes with the cutting angle. Flattening a slab a few millimetres will not remove it.